Description

Implementing Cisco Unified Communications IP Telephony Part 2 (CIPT2) v7.0/v6.0 prepares you for implementing and configuring, a Cisco Unified Communications Manager solution in a multisite environment. This course focuses on Cisco Unified CallManager, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features and voice security.

This course includes lab activities in which you will apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable call admission control (CAC) and automated alternate routing (AAR), a feature that allows rerouting of calls over the public switched telephone network (PSTN) in case of no available bandwidth. There are labs for implementing Cisco Unified Communications Manager Device Mobility, Cisco Unified Communications Manager Extension Mobility, Cisco Unified Mobility, and voice security.

NOTE: If you have Cisco Unified CallManager Release 6, while this class was developed for v7.0 and runs on the v7.0 platform, the class contains the same general content as CIPT2 v6.0, plus additional content related to v7.0.

Objectives

Upon completing this course, the learner will be able to meet these overall objectives:

• Describe the issues in multisite deployments and their solutions, and describe and configure required dial plan elements
• Implement call-processing resiliency in remote sites using SRST, MGCP fallback, and Cisco Unified Communications Manager Express
• Implement CAC to prevent oversubscription of the IP WAN
• Implement Cisco IOS Tcl and VoiceXML applications, along with mobility features such as Cisco Unified Communications Manager Device Mobility, Cisco Unified Communications Manager Extension Mobility, and Cisco Unified Mobility, so that users are reachable via their office phone numbers, regardless of their physical location and the various devices they may use.
• Secure a Cisco Unified Communications IP telephony deployment

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

• Working knowledge of converged voice and data networks
• Working knowledge of MGCP, session initiation protocol (SIP), and H.323, as well as their implementation on Cisco IOS gateways
• Ability to configure and operate Cisco routers and switches
• Ability to configure and operate Cisco Unified Communications Manager in a single-site environment
• Attendance in CIPT1 v7.0 is strongly recommended

Who Should Attend

The primary audience for this course is as follows:

• Network designer
• Network administrator
• Network engineer
• Network manager
• Systems engineer

• Course Introduction
  • Overview
  • Course Goal and Objectives
  • Course Flow
  • Additional References
  • Your Training Curriculum
• Module 1: Multisite Deployments
  • Lesson 1: Identifying Issues in a Multisite Deployment
    • Multisite Deployment Issues Overview
    • Quality Issues
    • Bandwidth Issues
    • Availability Issues
    • Dial Plan Issues
    • NAT and Security Issues
  • Lesson 2: Identifying Solutions for a Multisite Deployment
    • Multisite Deployment Solution Overview
    • QoS
    • Solutions to Bandwidth Limitations
    • Availability
    • Dial plan Solutions
    • NAT and Security Solutions
  • Lesson 3: Implementing Multisite Connections
    • Examining Multisite Connection Options
    • MGCP Gateway Implementation Review
    • H.323 Gateway Implementation Overview
    • Cisco IOS H.323 Gateway Configuration
    • H.323 Gateway Configuration with Cisco Unified Communications Manager
    • Trunk Implementation Overview
    • Implementing SIP Trunks
    • Implementing Intercluster and H.225 Trunks
  • Lesson 4: New Dial Plan Features – Release 7.x
    • Local Route Group Features and Benefits
    • Local Route Group Configuration
    • E.164 Overview
    • E.164 Support
    • + Dialing and Globalization Features and Benefits
    • Globalization (normalization) vs. Localization
    • Calling Party Normalization Support for Cisco Unified IP Phones
    • New Dial Plan Changes in Cisco Unified Communications Manager Release 7.x
    • Localization of the Called Number (Egress)
    • Localization of Called Numbers (Egress)
    • Localization of Calling Number
    • Localization of Calling Number
    • Globalization of Calling Numbers (Ingress)
    • Globalization of Called Number (phone)
    • Global Transformations – Configuration Overview for Outgoing Calls
  • Lesson 5: Implementing a Dial Plan for Multisite Deployments
    • Multisite Dial Plan Overview
    • Implementing Site Codes for On-Net Calls
    • Implementing PSTN Access
    • Implementing Selective PSTN Breakout
    • Implementing PSTN Backup for On-Net Intersite Calls
    • Implementing Tail-End Hop-Off (TEHO)
• Module 2: Centralized Call-Processing Redundancy
  • Lesson 1: Examining Remote Site Redundancy Options
    • Remote-Site Redundancy Overview
    • SRST Operation
    • MGCP Fallback Operation
    • Cisco Unified SRST Versions and Feature Support
    • Dial Plan Requirements for MGCP Fallback and SRST Scenarios
  • Lesson 2: Implementing SRST and MGCP Fallback
    • MGCP Fallback and SRST Configuration Overview
    • SRST Configuration in Cisco Unified Communications Manager
    • SRST Configuration on the Cisco IOS Gateway
    • MGCP-Gateway-Fallback Configuration on the Cisco IOS Gateway
    • Dial Plan Configuration for SRST Support in Cisco Unified Communications Manager
    • MGCP Fallback and SRST Dial Plan Configuration in the Cisco IOS Gateway
    • Telephony Features Supported By Cisco Unified SRST
  • Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode
    • Cisco Unified Communications Manager Express Overview
    • Characteristics and Requirements of Cisco Unified Communications Manager Express
    • General Configuration of Cisco Unified Communications Manager Express
    • Configuring Cisco Unified Communications Manager Express in SRST Mode
• Module 3: Bandwidth Management and Call Admission Control
  • Lesson 1: Implementing Bandwidth Management
    • Bandwidth Management Overview
    • Cisco Unified Communications Manager Codec Configuration
    • Local Conference Bridge Implementation
    • Transcoder Implementation
    • Multicast MOH from Branch Router Flash Implementation
  • Lesson 2: Implementing Call Admission Control
    • Call Admission Control Overview
    • Locations
    • Resource Reservation Protocol (RSVP)-Enabled Locations
    • Automated Alternate Routing
    • H.323 Gatekeeper CAC
• Module 4: Features and Applications for Multisite Deployments
  • Lesson 1: Implementing Call Applications on Cisco IOS Gateways
    • Call Applications Overview
    • Cisco IOS Call Application Support
    • Call Application Example: Auto-Attendant Script
    • Call Application Configuration
  • Lesson 2: Implementing Device Mobility
    • Issues with Devices Roaming Between Sites
    • Device Mobility Overview
    • Device Mobility Configuration Elements
    • Device Mobility Operation
    • Device Mobility Configuration
  • Lesson 3: New Phone Features and Services – Release 7.x
    • Call Forward All Loop Prevention and Breakout
    • IP Communicator Enhancements
    • Attendant Console and Cisco Unified IP Phone Expansion Modules
    • SIP Support enhancements
    • Enhanced IP Phone Services
    • Busy Lamp Field Pickup
  • Lesson 4: Implementing Extension Mobility
    • Issues with Users Roaming Between Sites
    • Cisco Unified Communications Manager Extension Mobility Overview
    • Cisco Unified Communications Manager Extension Mobility Configuration Elements
    • Cisco Unified Communications Manager Extension Mobility Operation
    • Cisco Unified Communications Manager Extension Mobility Configuration
  • Lesson 5: Implementing Cisco Unified Mobility
    • Cisco Unified Mobility Overview
    • Cisco Unified Mobility Call Flow
    • Cisco Unified Mobility Components
    • Cisco Unified Mobility Configuration
• Module 5: IP Telephony Security
  • Lesson 1: Understanding Cryptographic Fundamentals and PKI
    • Cryptographic Services
    • Symmetric vs. Asymmetric Encryption
    • Hash-Based Message Authentication Code (HMAC)
    • Digital Signatures
    • PKI
    • PKI Example: SSL on the Internet
  • Lesson 2: Understanding Native Cisco Unified Communications Manager Security Features and Cisco Unified Communications Manager PKI
    • Cisco Unified Communications Manager Security Features Overview
    • Cisco Unified Communications Manager IPsec Support
    • Signed Phone Loads
    • SIP Digest Authentication
    • SIP Trunk Encryption
    • Cisco Unified Communications Manager PKI Overview
    • Cisco Certificate Trust List
    • PKI Topology with Secure SRST
  • Lesson 3: Implementing Security in Cisco Unified Communications Manager
    • Enabling PKI-Based Security Features in Cisco Unified Communications Manager
    • Locally Significant Certificate Enrollment
    • Signed and Encrypted Configuration Files
    • Secure Signaling
    • Secure Media Transmission Between Cisco IP Phones
    • Secure Media Transmission to H.323 and MGCP Gateways
    • Secure Conferencing