Description
In this lab-intensive course, you will get an
introduction to the Cisco Optical Network System (ONS) Time Division
Multiplexing (TDM) family of transport products. The ONS 15454, ONS
15310-MA, and ONS 15310-CL are SONET transport system components that
can be mixed and matched to create high-speed optical transport
networks. You will learn about the SONET optical hierarchy OC-3 (155
Mbps) OC-12 (644 Mbps) OC-48 (2.5 Gbps) and OC-192 (10 Gbps). You will
learn how DS-1 (1.5 Mbps) and DS-3 (45 Mbps) electrical signals are
carried in the SONET optical links, and you'll learn to configure and
build circuits through the ADM10G card, a TDM card in the ONS 15454
DWDM system. In the course, you will cover electrical, Ethernet, and
optical protection options, linear and ring topologies, circuit
building, and troubleshooting. Each student team will work with an ONS
15454, ONS 15310-MA, and ONS-15310-CL. Objectives
This course prepares the learners for these tasks by meeting the following objectives:
- Major features and benefits of the Cisco ONS SONET products
- Set up and use the PC to connect to the ONS SONET network
- Provision the shelf for 1:1 and 1:N electrical protection
- Provision the shelf for optical protection 1+1, path ring and line ring
- Create circuits at the DS3 and VT1.5 level
- Provision Ethernet ports and create circuits between Ethernet components
- Provision the ADM-10G DWDM card and install circuits
- Move circuits using the bridge-and-roll capability of Cisco SONET system
Prerequisites
Familiarity with the following topics will be beneficial.
- Knowledge of DS1, DS3, and SONET is useful but not required
Who Should Attend
This course is intended for maintenance
personnel, transport engineers, and managers who require a detailed
understanding of SONET transport network components, interconnection,
circuit building, and maintenance. |
